Lift and to open the door.

Go to next step >

Remove both ingredient packages.

Check their expiry dates (printed) and opening date (written).

Clean the interior of the refrigerator with a moist cloth.

Go to next step >

Take a thawed liquid pack and read the instructions on the pack.

Shake the pack at least 10 times.

Write the current date on the pack.

Go to next step >

Tear open the dosing tube opening, and unfold the dosing tube.

Check that the dosing tube is positioned straight and that the coloured ring on the tube covers the corresponding circle on the pack.

Open the dosing tube by turning it 90 degrees clockwise, check if the tube starts filling itself.

Go to next step >

Place the ingredient packages into the refrigerator.

Close the door.

Go to next step >

Activate the hidden globe icon in the bottom left corner of the touchscreen and press it to open the operator menu.

Open the Menu, then press ‘Flush’ and follow the instructions on the touchscreen.

Go to next step >

Place a 3-litre container on the drip tray.

WARNING!

Hot water will flow into the rinsing container. When ready, press ‘ENTER’ to continue.

Go to next step >

Carefully remove and empty the rinsing container.

Go to next step >

Disassemble the drip tray. Clean the parts with clean water and a brush.

Go to next step >

Reassemble the drip tray and place it back.

Go to next step >

Open the door and push the ‘stand by’-button to disable the touchscreen. Then close the door.

Go to next step >

Clean the exterior of the machine with a moist cloth.

Never spray directly onto the machine.

Open the door and push the ‘stand by’-button again, to enable the touchscreen. Then close the door.